Motorcycle

Bolt-On - Item numbers Ending in -03
Some premium leather saddlebags are
available as bolt on only bags due to their
size and weight. These bags must be used in
conjunction with a hard mount or detachable
bracket system (not included). In order to
ensure mutliple models and style fitments,
bolt-on bags are NOT pre drilled.

Zip Off Detachable - Item Numbers Ending in -04
Some premium leather saddlebags are available
with our cutting edge Zip n' Carry Detachable*
throw over system. This state of the art system
boasts a 10" heavy duty zipper with a safety snap
feature that double locks the zipper is place for
added security and peace of mind.

All Bikes Are Different, Please Use This As A Reference Only

Proper Measurements required for fitting saddlebags are as
follows:
1. Bags are measured from the back of the bag
2. Measure Side to Side (B): From the back of the seat (rider's
position) or shock to the back of the turn signal. Measurement
should be greater than the top of the bag length (L).

3. Measurement from top to bottom (A). From the bottom of the
seat pad or to the top of of the fender, top the top of the
exhaust pipe. Subtract 2" from measurement, this is your
maximum saddlebag height (H) for clearance.

4. Maximum Clearance (MC): The 2nd measurement in
(parenthesis) is the maximum clearance on the bag. Longest
point to longest point.

All throw over saddlebags must be used in conjunction with a
saddlebag support bracket to keep bags from interfering with
any operating components. 2" of space must be allowed
between bottom of bag and top of exhaust pipes for safety.
Re-check clearance when saddlebag is loaded and with rider if
you will have passenger to reassure clearance requirements
have been met.
**Do Not Overload Bags - Recommended Maximum Weight Is
10 lbs. Per Side**